As already we have discussed in our earlier posts that there are different types of losses that are involved in the PON FTTH network so when we are building the FTTx network we should calculate the optical power on paper first and then we should deploy the fiber on the ground. As we know the optical RX power… Read More »
In an EPON OLT, it support 64 ONU on per PON port.So it is important to understand the splitting idea so that you can connect all of your 64 ONT with optimal power according to your distance. In GPON OLT, it supports 128 ONU per PON port. So it is important to understand the splitting idea so that… Read More »
There are different types of PON SFP we have in GPON & EPON.So make sure you have installed the correct SFP in your OLT. The most important thing in SFP is the transmit power, The SFP which has high transmit power is good. but it depends on the OLT manufacturer too because their OLT must support the high… Read More »
Splitters are used for dividing one or two optical signals into multiple optical signals.splitters are passive optical devices that are widely used in Passive Optical Networks such as GPON, and EPON. There are different types of splitters we have and every splitter has a different insertion loss, So this is very important to understand in the FTTx network… Read More »
One of the main benefits of FTTH (Fiber to the Home) – also called FTTP, for “fiber to site” broadband – is that it provides much faster connection speeds and load capacity than twisted pair conductors, DSL, or coaxial cable Fiber to the Home or simply FTTH is a technology that uses fiber optics directly from ISP POP… Read More »
